Page 68 - Shawl Weaving Artisan - TP

Table 2 Table 3

S.No. Parameter Value S. No. Parameter Value
1 Total Ends 2400 1 Total ends required 3600
2 Ends per inch (EPI) 60 2 EPI 80
3 Width of warp 40 inches 1 inch
4 Section width 1 inch 3 Section width
5 Number of sections 40 4 Warp beam flange width 60 inches
6 Ends per section 60 5 Creel capacity 120 cones
7 Creel capacity 100 cones/ bobbins b Calculate the given data (Table 4)
8 Patterns per section 1 Table 4
7 Analysis Students
S. No. Parameter
• Warp width is within beam flange width (Beam data
flange = 50 inches, warp width = 40 inches).
1 Total ends
• Creel capacity is sufficient for this warp plan.
2 EPI
• Only 1 loading pattern per section is required.
3 Warp width
• No extra creel changeover needed during
warping. 4 Section width
8 Practical worksheet for trainees 5 Number of sections
a Given data (Table 3) 6 Ends per section

7 Creel capacity
8 Patterns per section

9 Total ends

56 Textile & Handloom : Shawl Weaving Artisan (NSQF - 2024) Exercise 1.4.38